A dory is defined as a small lightweight boat from 15 to 22 feet long with a flat bottom, high flaring sides and sharp bows. Dories have been used as commercial fishing boats for centuries.
C-Dory boats have taken the classic dory boat design and altered it to increase the lift and decrease wake and spray as it travels. C-Dory craft are known as tough, practical, nearly infallible boats that can handle choppy seas and punishing marine conditions, even in such volatile seas as the Alaska region.
Even the indestructible boats need primo care. It may be sometime before the season ends, but you’ll want to read up on the precautions you need to take to ensure a long life for your boat. Prior to the step below, Drain the gear case and check for excessive moisture in the motor.
Then, flush engine with fresh water using flush muffs or similar device attached to the raw water pickup. Let all water drain from the engine. Wash engine down with soap and water and rinse thoroughly. Disconnect fuel hose and run engine until it stops. It is important to follow a step by step process to make sure that all fuel is drained from the carburetor to prevent build-up of deposits from evaporated fuel. Use fogging oil in the cylinders to lubricate the cylinder walls and pistons. Apply water resistant grease to propeller shaft and threads. Change the gear oil in the lower unit. Lightly lubricate the exterior of the engine or polish with a good wax.